Выберите файл Excel (.xls; .xlsx) или файл CSV (.txt; .csv; .tab):
Очистить корзину перед импортом:
Первая строка содержит заголовки, ее следует игнорировать:
Номер столбца с номером артикула:
Номер столбца с данными о количестве:
Разделительный символ (для файлов *.csv):
Export on Demand

StyliCleaner

The integrated solution to clean your probe tip

Reliable? Avoid mismeasurement with the StyliCleaner®

Put an end to the risk of wrong measuring data caused by a polluted stylus!

Mitutoyo StyliCleaner The automated solution to remove dust or chip from coordinate measuring machines’ styli. The StyliCleaner® automatically cleans your probe tip - even during the measurement process. In as little as 30 seconds a combination of compressed air and detergent reliably removes all dirt from the sensor. The StyliCleaner® not only sets an end to the hassle of manual cleaning but also to the time-consuming recalibration of all probe angles that follows it. As a result, StyliCleaner® dramatically increases the efficiency and reliability of your quality assurance!

The StyliCleaner® shows exceptional results from the beginning. Customers are happily surprised by the results, with the StyliCleaner® showing strength in improving production measurements and SPC. That’s why in every Metrology course it is mentioned: Clean the part, the fixture and the styli.

Risk at manual styli cleaning

  • Contaminations on the styli elements lead to significant deviations in themeasurement results.
  • Cleaning the stylus elements is time consuming and requires a high level of expertise.
  • Human error can lead to damage and misplacement of the stylus.
  • This leads to downtimes in which measurements cannot be made.

Solution

  • Human error is avoided
  • Planning of automatic cleaning cycles to remove dust, oil or chips from spherical stylus elements.
  • The cleaning cycle can be coupled to the calibration cycle, for example.
  • The cleaning program can also be initiated by less qualified personnel using a barcode or QR code.

Cleaning process

The stylus tip element is cleaned with cleaning agent for 10 seconds and then for 10 seconds dried residue-free with compressed air.
Great increase in efficiency.

1 - 5 (10)Результатов на странице:
63AAA102 63AAA132.1.jpg
stylus diameter 0-8,0mm, minimum stylus length 20,0mm
Цена продажи: 2 800,00*
stylus diameter 0-8,0mm, minimum stylus length 20,0mm
Цена продажи: 2 800,00*
63AAA102 63AAA132.1.jpg
stylus diameter 6,0 - 12,0mm, minimum stylus length 20,0mm
Цена продажи: 3 000,00*
stylus diameter 6,0 - 12,0mm, minimum stylus length 20,0mm
Цена продажи: 3 000,00*
63AAA133.jpg
stylus diameter 0-4,0mm, minimum stylus length 10,0mm
Цена продажи: 3 000,00*
stylus diameter 0-4,0mm, minimum stylus length 10,0mm
Цена продажи: 3 000,00*
63AAA134 63AAA135.jpg
stylus diameter 0-8,0mm, minimum stylus length 20,0mm
Цена продажи: 5 390,00*
stylus diameter 0-8,0mm, minimum stylus length 20,0mm
Цена продажи: 5 390,00*
63AAA134 63AAA135.jpg
stylus diameter 6,0 - 12,0mm, minimum stylus length 20,0mm
Цена продажи: 5 590,00*
stylus diameter 6,0 - 12,0mm, minimum stylus length 20,0mm
Цена продажи: 5 590,00*
*VAT excluded. All products are intended to be sold to commercial customers.