The integrated solution to clean your probe tip

Reliable? Avoid mismeasurement with the StyliCleaner®

Put an end to the risk of wrong measuring data caused by a polluted stylus!

Mitutoyo StyliCleaner The automated solution to remove dust or chip from coordinate measuring machines’ styli. The StyliCleaner® automatically cleans your probe tip - even during the measurement process. In as little as 30 seconds a combination of compressed air and detergent reliably removes all dirt from the sensor. The StyliCleaner® not only sets an end to the hassle of manual cleaning but also to the time-consuming recalibration of all probe angles that follows it. As a result, StyliCleaner® dramatically increases the efficiency and reliability of your quality assurance!

The StyliCleaner® shows exceptional results from the beginning. Customers are happily surprised by the results, with the StyliCleaner® showing strength in improving production measurements and SPC. That’s why in every Metrology course it is mentioned: Clean the part, the fixture and the styli.

Risk at manual styli cleaning

• Contaminations on the styli elements lead to significant deviations in themeasurement results.
• Cleaning the stylus elements is time consuming and requires a high level of expertise.
• Human error can lead to damage and misplacement of the stylus.
• This leads to downtimes in which measurements cannot be made.

Solution

• Human error is avoided
• Planning of automatic cleaning cycles to remove dust, oil or chips from spherical stylus elements.
• The cleaning cycle can be coupled to the calibration cycle, for example.
• The cleaning program can also be initiated by less qualified personnel using a barcode or QR code.

Cleaning process

The stylus tip element is cleaned with cleaning agent for 10 seconds and then for 10 seconds dried residue-free with compressed air.
Great increase in efficiency.